Renovating can either be a fun experience, or a frustrating one, counting on how well you are prepared for it. And if you’re renovating a house, then we might hope are quite well prepared. After all, the last item you want to have to do when you’re done is to Design & Build something you thought was working out just fine.
In any home, space is a problem . you’ll really never have enough of it. And a well made closet space is an important part of the house’s over all aesthetics. When smartly framed, your closet are often quite an asset, whether it’s for your precious wardrobe, or next to the most door to just hang coats. Now let’s take it from the highest .
First, you would like to decide on the ideal size. 27 inches of depth is what you would like for minimum, especially if you propose on hanging your clothes. Other size factors depend upon the size of your room or what you need. you’ll go with a smaller single door closet, or a much bigger walk in.
The best way to frame your closet is by laying the structure flat on the ground. you would possibly want to consider placing it at one end of the room’s wall, just to form it more space efficient. But ensure it doesn’t obstruct windows or heat boxes.
Once you’ve the basic raw materials ready, ensure you’ve got the hardware too; apart from your tool box, confine handy a nail gun, an influence miter box and a compressor. If you do not have it on you, you’ll easily rent all three for less than $100 a day.
After you measure the wall height, you ought to cut them into length and lay them out between the top and sole plates that will be fixed to your ceiling and floor respectively. Also, work out where your door will be centered and make sure you mark each spot that needs nailing or trimming, and every part of the frame clearly. then , it’s really just putting the parts in situ carefully.
Once your frame is prepared , hoist it up carefully to place in place using 3 screws to fix the top of the frame to the ceiling. Place your choice of doors on to the frame and if you would like to put a light bulb inside, it’s advised you consult your local electrical inspector and use only fluorescent lights.